• 7/16” wrench
• 1/4” nut driver
• Phillips screwdriver
• step ladder
• liquid detergent
• small rag
• knife
• pliers
• measuring tape
• level, automatic drill
• 5/16” drill bit and square

General Assembly Steps*

1. Assemble sill, base frame and end frames (Treated wood frame and anchor bolts provided by customer)
   
2. Assemble roof
3. Install side bars and center end bar
4. Glaze the ends
5. Glaze the sides and roof
6. Install door
7. Install vent arms

*Overview provided for general information only. For complete assembly instructions, see information provided in kit.

WARNING: ALL GLAZING MUST BE INSTALLED WITH THE "UV" SIDE OUT. ALL PROTECTIVE COVERING MUST BE REMOVED BEFORE INSTALLATION; FAILURE TO REMOVE THE PROTECTIVE COVERING MAY PERMANENTLY DAMAGE THE COVERING MATERIAL.